Volnewmer vs InMode: What's the Difference and How to Choose?

When you start noticing a loss of elasticity or sagging, it's common to search for 'RF lifting' procedures. Among the RF-based devices that are frequently compared by name, Volnewmer and InMode stand out—while their underlying principles are similar, they differ in specific details.

This article organizes information-focused details about both procedures' operating principles, recovery course and downtime, and post-procedure home care during the recovery period. Rather than asserting that one procedure is superior, it's structured to help you understand the characteristics of each and make an informed choice suited to you through consultation with a specialist.

Volnewmer vs InMode: What's the Same and What's Different

Volnewmer is introduced as an RF-based skin lifting device developed by Classys. It's explained that RF energy is delivered to the dermis through monopolar electrodes, generating heat via the electrical resistance of skin tissue, and this heat acts on collagen and elastin fibers within the dermis. This process is described as inducing a tissue response in which existing collagen fibers contract, followed by the generation and remodeling of new collagen.

InMode is also a lifting-category device that uses RF energy, and like Volnewmer, its broad principle is similar in that it induces a collagen response in the dermis through thermal energy. However, differences may exist in the manufacturer, tip configuration, and detailed design of energy delivery, so determining which device is better suited to a specific area or concern requires the judgment of a specialist who has directly examined the skin condition.

For Volnewmer, an approach is introduced in which treatment areas are divided according to tip type: V Tip (broad areas), I Tip (narrow areas such as around the eyes), F Tip (contoured areas such as nasolabial folds), and S Tip (body areas such as the abdomen and arms). Devices with this kind of area-specific tip configuration are sometimes considered when the goal is to focus on a specific area rather than the entire face.

Detailed specifications such as the frequency band used are cited differently across sources—either 6.48MHz or 6.78MHz—making it difficult to confirm a single accurate figure. If you're considering the procedure, it's best to directly confirm the exact specifications and protocol used at the specific clinic during a consultation.

Procedure Course and Downtime

Volnewmer is typically guided as requiring 3 to 5 sessions at intervals of 2 to 4 weeks, with perceived results often described as lasting around 3 to 6 months. However, this is information based on clinic materials rather than a confirmed clinical figure, and the degree of perceived effect and duration can vary depending on individual skin condition, age, and care habits.

Descriptions of pain levels differ somewhat across sources. Some materials explain that a water-cooling system reduces pain compared to other thermal energy devices, while others describe an average pain level of 3 to 5 out of 10. Since pain sensitivity varies greatly between individuals, it can help to check on options such as using numbing cream before the procedure during a consultation.

Temporary redness or a warm residual sensation may appear from immediately after the procedure to within a day, and this is generally described as subsiding within a few hours in most cases. However, the degree of this reaction and the speed of recovery vary from person to person, and since InMode is also a thermal energy-based procedure, similar temporary reactions may occur. If any unusual reaction persists or causes concern after the procedure, it's best to contact the medical facility where you were treated.

Home Care During the Post-Procedure Recovery Period

Since the skin barrier can become temporarily sensitive after RF-based lifting procedures, it may help to avoid products with irritating ingredients and focus on basic skin barrier care such as sun protection and adequate hydration.

A two-stage approach is commonly recommended: soothing, low-irritation care in the first few days after the procedure, followed by a natural transition to deep hydration care during the subsequent recovery period as the skin stabilizes.

Post-Procedure Recovery Depends on Home Care

Since the skin condition differs between the period right after the procedure when soothing is needed and the later recovery period when moisturizing care is needed, it can help to consider home care suited to each stage. ABJU cream is structured as a 2-STEP system to match this flow. Right after the procedure, STEP 1 Ultra Cera-Rich helps soothe redness and support the skin barrier, while during the subsequent recovery period, STEP 2 Hydro Re-Boosting continues with deep hydration care. That said, it's safer to have the treated area checked by the clinic before using any products, and perceived effects can vary from person to person.

Medically reviewed by 아비쥬의원 의료진. (September 10, 2026)